 |
| |
 | | Humidification
When the atmosphere becomes too dry, moisture is drawn from surrounding materials within the area such as furniture, paper, textiles, fruit, animals and even people. Low relative humidity is not only uncomfortable, it can be damaging to equipment and materials. It also causes static electricity to generate which in turn produces unpleasant effects in many cases.
The sonicom™ fogging nozzle is ideal for increasing the level of relative humidity within a room by introducing moisture back into the air without causing wet areas or excessive water drop out.
Ultra fine fogs down to only 1 micron (0.001mm) are possible therefore ensuring the soft plume of water droplets remain in suspension until evaporation takes place. When complemented with our special water valve assembly, the unit becomes a highly efficient self cleaning atomiser.
The heavy duty brass water valve is controlled by the same compressed air supply used to activate the nozzle. A simple on/off signal is required to activate the system and when the signal is removed, the water valve self cleans the nozzle every time by blowing excess water away, significantly reducing lime, salts and chalk build-up.
Special nozzle assemblies can also be manufactured to suit specific requirements. This triple flange mounted version is ideal for use within a ducting system. When mounted in front of a fan, the fog will flow along the duct until it emerges out into the room or evaporates within the air flow.
Humidification systems can be used for a multitude of applications, see some of these in further detail below...
|
|
 |
